RIP-R2

 

 

Router>

Router>en

Router#

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#

Router(config)#int f 0/0 ?

  <cr>

Router(config)#int f 0/0

Router(config-if)#

Router(config-if)#ip add 30.0.0.1 255.255.255.0 ?

  <cr>

Router(config-if)#ip add 30.0.0.1 255.255.255.0

Router(config-if)#

Router(config-if)#no shut ?

  <cr>

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#int s 1/0 ?

  multipoint      Treat as a multipoint link

  point-to-point  Treat as a point-to-point link

  <cr>

Router(config)#int s 1/0

Router(config-if)#ip add 20.0.0.2 255.255.255.252 ?

  <cr>

Router(config-if)#ip add 20.0.0.2 255.255.255.252

Router(config-if)#

Router(config-if)#clock rate 64000 ?

  <cr>

Router(config-if)#clock rate 64000

Router(config-if)#no shut ?

  <cr>

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface Serial1/0, changed state to up

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#i

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up

nt s 1/1

Router(config-if)#

Router(config-if)#int s 1/1 ?

% Unrecognized command

Router(config-if)#int s 1/1

Router(config-if)#

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#int s 1/1 ?

  multipoint      Treat as a multipoint link

  point-to-point  Treat as a point-to-point link

  <cr>

Router(config)#int s 1/1

Router(config-if)#

Router(config-if)#ip add 40.0.0.1 255.255.255.252 ?

  <cr>

Router(config-if)#ip add 40.0.0.1 255.255.255.252

Router(config-if)#

Router(config-if)#no shut ?

  <cr>

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial1/1, changed state to down

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#router rip ?

  <cr>

Router(config)#router rip

Router(config-router)#network 20.0.0.0

Router(config-router)#network 30.0.0.0 ?

  <cr>

Router(config-router)#network 30.0.0.0

Router(config-router)#

Router(config-router)#network 40.0.0.0 ?

  <cr>

Router(config-router)#network 40.0.0.0

Router(config-router)#

Router(config-router)#exit ?

  <cr>

Router(config-router)#exit

Router(config)#router rip ?

  <cr>

Router(config)#router rip

Router(config-router)#version 2 ?

  <cr>

Router(config-router)#version 2

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#sh ip route ?

  WORD       Network to display information about or hostname

  bgp        Border Gateway Protocol (BGP)

  connected  Connected

  eigrp      Enhanced Interior Routing Protocol (EIGRP)

  ospf       Open Shortest Path First (OSPF)

  rip        Routing Information Protocol (RIP)

  static     Static routes

  <cr>

Router#sh ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

       * - candidate default, U - per-user static route, o - ODR

       P - periodic downloaded static route

Gateway of last resort is not set

R    10.0.0.0/8 [120/1] via 20.0.0.1, 00:00:11, Serial1/0

     20.0.0.0/30 is subnetted, 1 subnets

C       20.0.0.0 is directly connected, Serial1/0

     30.0.0.0/24 is subnetted, 1 subnets

C       30.0.0.0 is directly connected, FastEthernet0/0

     40.0.0.0/30 is subnetted, 1 subnets

C       40.0.0.0 is directly connected, Serial1/1

R    50.0.0.0/8 [120/1] via 40.0.0.2, 00:00:25, Serial1/1

Router#sh ip protocol ?

  <cr>

Router#sh ip protocol

Routing Protocol is "rip"

Sending updates every 30 seconds, next due in 15 seconds

Invalid after 180 seconds, hold down 180, flushed after 240

Outgoing update filter list for all interfaces is not set

Incoming update filter list for all interfaces is not set

Redistributing: rip

Default version control: send version 2, receive 2

  Interface             Send  Recv  Triggered RIP  Key-chain

  Serial1/0             2     2    

  FastEthernet0/0       2     2    

  Serial1/1             2     2    

Automatic network summarization is in effect

Maximum path: 4

Routing for Networks:

            20.0.0.0

            30.0.0.0

            40.0.0.0

Passive Interface(s):

Routing Information Sources:

            Gateway         Distance      Last Update

            20.0.0.1             120      00:00:20

            40.0.0.2             120      00:00:33

Distance: (default is 120)

Router#