EIGRP-R3

Router>en

Router#

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#

Router(config)#int f 0/0 ?

  <cr>

Router(config)#int f 0/0

           

Router(config-if)#ip add 50.0.0.1 255.255.255.0 ?

  <cr>

Router(config-if)#ip add 50.0.0.1 255.255.255.0

Router(config-if)#

Router(config-if)#no shut ?

  <cr>

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#int s 1/0 ?

  multipoint      Treat as a multipoint link

  point-to-point  Treat as a point-to-point link

  <cr>

Router(config)#int s 1/0

Router(config-if)#ip add 40.0.0.2 255.255.255.252 ?

  <cr>

Router(config-if)#ip add 40.0.0.2 255.255.255.252

Router(config-if)#

Router(config-if)#clock rate 64000 ?

  <cr>

Router(config-if)#clock rate 64000

Router(config-if)#

Router(config-if)#no shut ?

  <cr>

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface Serial1/0, changed state to up

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#router eigrp 1 ?

  <cr>

Router(config)#router eigrp 1

Router(config-router)#network 40.0.0.0 ?

  A.B.C.D  EIGRP wild card bits

  <cr>

Router(config-router)#network 40.0.0.0

Router(config-router)#

%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 40.0.0.1 (Serial1/0) is up: new adjacency

Router(config-router)#network 50.0.0.0 ?

  A.B.C.D  EIGRP wild card bits

  <cr>

Router(config-router)#network 50.0.0.0

Router(config-router)#variance 64 ?

  <cr>

Router(config-router)#variance 64

Router(config-router)#exit ?

  <cr>

Router(config-router)#exit

Router(config)#

%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 40.0.0.1 (Serial1/0) is up: new adjacency

Router(config)#