EIGRP-R1

 

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: n

Press RETURN to get started!

Router>en

Router#

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#

Router(config)#int f 0/0 ?

  <cr>

Router(config)#int f 0/0

Router(config-if)#ip add 10.0.0.1 255.255.255.0 ?

  <cr>

Router(config-if)#ip add 10.0.0.1 255.255.255.0

Router(config-if)#

Router(config-if)#no shut ?

  <cr>

Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#int s 1/0 ?

  multipoint      Treat as a multipoint link

  point-to-point  Treat as a point-to-point link

  <cr>

Router(config)#int s 1/0

Router(config-if)#ip add 20.0.0.1 255.255.255.252 ?

  <cr>

Router(config-if)#ip add 20.0.0.1 255.255.255.252

Router(config-if)#

Router(config-if)#no shut ?

  <cr>

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial1/0, changed state to down

Router(config-if)#

Router(config-if)#exit ?

  <cr>

Router(config-if)#exit

Router(config)#

Router(config)#

Router(config)#

Router(config)#router eigrp ?

  <1-65535>  Autonomous system number

Router(config)#router eigrp 1 ?

  <cr>

Router(config)#router eigrp 1

Router(config-router)#network 10.0.0.0 ?

  A.B.C.D  EIGRP wild card bits

  <cr>

Router(config-router)#network 10.0.0.0

Router(config-router)#network 20.0.0.0 ?

  A.B.C.D  EIGRP wild card bits

  <cr>

Router(config-router)#network 20.0.0.0

Router(config-router)# variance ?

  <1-128>  Metric variance Multiplier

Router(config-router)# variance 64 ?

  <cr>

Router(config-router)# variance 64

Router(config-router)#^Z

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#sh ip route ?

  WORD       Network to display information about or hostname

  bgp        Border Gateway Protocol (BGP)

  connected  Connected

  eigrp      Enhanced Interior Routing Protocol (EIGRP)

  ospf       Open Shortest Path First (OSPF)

  rip        Routing Information Protocol (RIP)

  static     Static routes

  <cr>

Router#sh ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP

       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

       * - candidate default, U - per-user static route, o - ODR

       P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks

D       10.0.0.0/8 is a summary, 00:00:59, Null0

C       10.0.0.0/24 is directly connected, FastEthernet0/0

     20.0.0.0/8 is variably subnetted, 2 subnets, 2 masks

D       20.0.0.0/8 is a summary, 00:00:59, Null0

C       20.0.0.0/30 is directly connected, Serial1/0

Router#sh ip protocol ?

  <cr>

Router#sh ip protocol

Routing Protocol is "eigrp  1 "

  Outgoing update filter list for all interfaces is not set

  Incoming update filter list for all interfaces is not set

  Default networks flagged in outgoing updates 

  Default networks accepted from incoming updates

  EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0

  EIGRP maximum hopcount 100

  EIGRP maximum metric variance 64

Redistributing: eigrp 1

  Automatic network summarization is in effect 

  Automatic address summarization:

    10.0.0.0/8 for Serial1/0

      Summarizing with metric 28160

    20.0.0.0/8 for FastEthernet0/0

      Summarizing with metric 20512000

  Maximum path: 4

  Routing for Networks: 

     10.0.0.0

     20.0.0.0

  Routing Information Sources: 

    Gateway         Distance      Last Update

  Distance: internal 90 external 170

Router#